Parameter
|
Definition
|
Range
|
System
|
--
|
--
|
•CC |
The code that identifies the country's network.
|
Numeric max 4 digits
|
•NDC |
Define the national calling area or national network to which the subscriber belongs.
|
Numeric max 6 digits
|
•VMS Number |
Define the MSISDN and service numbers for voicemail server. This number will be used to route notification short message.
|
Numeric max 16 digits
|
•PLMN Service Number |
Define the service numbers for voicemail server. All numbers must include CC and NDC. Multiple VMS servers may use the same VMS MSISDN but different Service Numbers.
This service number is for the requests from local network. Subscriber dials this dedicated number to enter his mailbox or leave message to other subscribers.
|
•PSTN Service Number |
This service number is for the requests from PSTN. Subscriber dials this dedicated number from PSTN to access voicemail system. Inputs the mailbox number (MSISDN) and password (if password enabled) according to the system prompt to . After the verification the subscriber may enter his mailbox or leave message to other subscribers.
|
•Leave Message Number |
Dedicated service number for directly leaving message. Subscriber dials this number from either PSTN or local network to leave message to system subscribers.
|
•Check Message Number |
Dedicated service number for directly checking inbox message. Subscriber dials this number from either PSTN or local network to check his inbox message.
|
•International Prefix |
A digit or combination of digits used by a subscriber when making an international call. The international prefix is used to indicate that the following digits represent an international number and should be routed to an international gateway.
|
Numeric max 2 digits
|
•National Prefix |
A digit or combination of digits used by a subscriber when calling a national destination (within the country) other than that of the local area network.
|
Numeric max 2 digits
|
•Greeting Number Modification |
It determines the Number Attribute Identity of the host number which will be announced to the visitors in the greeting announcement.
•Sub = Unknown(Sub) = "SN" •NDD = "NDC+SN" •IDD = "+CC+NDC+SN" •Unknown(NDD) = "Nat Prefix+NDC+SN" •Unknown(IDD) = "Int Prefix+CC+NDC+SN" |
•Sub •NDD •IDD •Unknown (Sub) •Unknown (NDD) •Unknown (IDD) |
•Ringback Number Modification |
It determines the Number Attribute Identity of the host number which will be sent as the calling number in the direct ringback ISUP messages.
|
•Link Type |
Type of the VMS links.
|
•E1 •T1 |
•Codec Type |
Codec(compression/decompression) algorithm of the VMS.
|
•A-law •Mu-law •AMR •EFR •FR •G.729 |
Trunk
|
--
|
--
|
•Network Indicator |
Specify the local node to a network. Choose the same network as MTP3 setting.
|
•National •National Spare •International •International Spare |
•DPC |
Point Code of MSC.
|
ITU = 1 - 16383
ANSI = 1 - 16777215
|
•OPC |
Assign the unique decimal Point Code to VMS.
|
•CIC |
Specify the beginning Circuit ID Code of each trunk. Support up to 8 BICC trunks.
|
32 x n + 1 (n = 0~7)
|
•Circuit Selection |
Circuit selection mode of the traffic channel connections.
|
•Clockwise •Anti-clockwise •Odd •Even |
•Circuit Delay |
Define the interval between sending ACM and ANM messages.
|
0 - 5 seconds
|
Mailbox
|
--
|
--
|
•Min Message Length |
Define the minimum length of a voicemail message. Any voicemail less than preset minimum length will not be recorded and sent to mailbox host.
|
•Unlimited •1 - 5 seconds |
•Max Message Length |
Define the maximum length of a voicemail message. The surplus part of the voicemail will be ignored.
|
•20 seconds •30 seconds •40 seconds •60 seconds •80 seconds •100 seconds •120 seconds |
•New Message Validity |
Specify the storage period of an inbox new(unread) message. The message will be deleted after this period. Unit is day.
|
1 - 255 days
|
•Saved Message Validity |
Specify the storage period of an inbox saved message. The message will be deleted after this period.
|
•Message Play Order |
Define the play sequence of the inbox messages.
|
•New message first •Old message first |
•Password Retry Times |
VMS will refuse the access request after the password attempt times reaches this preset value.
|
1 - 5
|
•Key-press Timeout |
Timeout for the interval between two continuous key-press. If the interval is longer than the preset timer, the system will regard that the digit collection (key-press) is completed. Unit is second.
|
5 - 30 seconds
|
CLI Modification
|
--
|
Max 32 items
|
•Prefix |
The initial digits of the caller number. This number can be any number (from PSTN or PLMN).
|
Numeric max 16 digits
|
•Original NAI |
Original Number Attribute Identity of the caller numbers beginning with this prefix.
|
•Unknown •Subscriber •National •International |
•Deletion Count |
The amount of digits to be deleted from the beginning of the calling number.
|
0 - 16
|
•Inserted Digits |
The digits to be added to the front of the calling number.
|
Numeric max 16 digits
|
•Modified NAI |
Number Attribute Identity of the caller number after manipulation.
|
•Unknown •Subscriber •National •International |
SMS Notification
|
Specify coding scheme and customize notification SMS contents for supported languages. The message is separated into two parts by the caller number.
|
Max 5 items
|
•New Message |
Define the notification short message contents for a new voicemail message.
•1=You got a new voice mail from <MSISDN> •2=. Please dial xxx to check. |
--
|
•Unanswered Call - CLI |
Define the notification short message contents for an unanswered incoming call with caller number.
•1=You got a missed call from <MSISDN> •2=. |
--
|
•Full Mailbox |
Define the notification short message contents for an overload mailbox. The notification will be sent to the host when receiving a new message but the mailbox is full.
•1=Your mailbox is full. <MSISDN> •2= tried to call you. |
--
|
•Unanswered Call - No CLI |
Define the notification short message contents for an unanswered incoming call without caller number.
•1=You got a missed call. |
--
|
Voice Group
|
Refer to UltraWAVE Voice Group Table for more details.
|
--
|
•Public Voice Group |
Public voice groups are used to array up to 32 voice units in a sequence to provide different voicemail audio prompts. Each voice group determines a kind of prompt.
|
--
|
•Voice Group for Language 0 - 4 |
These 256 voice groups are used to array up to 32 voice units in a sequence to provide voicemail audio prompts in the specific language. Each voice group determines a kind of prompt.
|
--
|