SMSC

As a value added entity of the UltraWAVE system, the SMSC is integrated in the MSS (Multiple System Server) along with the MSC, AAS, HLR, AUC and PPS servers and implemented in the UltraWAVE network. It supports delivery of mobile originated (MO) and mobile terminated (MT) short messages, stores undelivered messages for later delivery when subscriber phone is temporary unavailable, and provides short message notification to prepaid subscribers and voicemail subscribers.

The SMSC supports both ITU SS7 and IS-41 protocols. It can be deployed along with the UltraWAVE system or standalone to connect third party device. In a UltraWAVE network, the SMSC is deployed in dual server load sharing mode to assure high efficiency and stability.

Each short message supports up to 160 characters (Latin alphabets) or 70 characters (Chinese or Arabic). The SMS uses signaling channels only. The messages transmit simultaneously with the voice/data/fax service over a GSM network.

Feature	Descriptions
Capacity	100k subscribers 200k BHCA SM length: 160 English characters or 80 Chinese characters
SMS	MO, MT point to point short message MO/MT verification SMS notification, polling Delivery acknowledgement Store max. 100k pending short messages (8 per subscriber) SMS polling Default alphabet (English) and UCS-2 character (Chinese) SM notification: •Report account balance •Notification for new voice mail •Notification for low balance or expiry •Notification of prepaid services
SMPP	Support SMPP v3.4 32 SMPP links over UDP or TCP Number type and number plan manipulation for up to 64 service numbers Transmit messages between ESME and SME Support Tx, Rx, TRx for each SMPP link Support 7 and 8 bit DCS coding for each SMPP link
Redundancy	Dual servers load sharing and active redundancy
License control	SMSC application flag 10 to 100k SMSC subscribers at multiples of 100

Parameter	Definition	Range
System	--	--
•SM Validity	Define the maximum duration of a pending message which should be kept in sending array till reaches the called subscriber. Messages can't send out in the validity period will be deleted. The minimum unit is 1 second.	1 - 604800 seconds
•CDR Flag	Enable or disable the Call Detail Record generation of short messages.	•ON •OFF
•Log Flag	Enable or disable the log generation of the short message service.	•ON •OFF
•Local Polling Flag	Enable or disable resend pending SMS to unattainable local subscribers.	•Enable •Disable
•Local Roaming Out Polling Flag	Enable or disable resend pending SMS to unattainable outbound roaming subscribers.
•Local Roaming In Polling Flag	Enable or disable resend pending SMS to unattainable inbound roaming subscribers.
•Other Polling Flag	Enable or disable resend pending SMS to other unattainable subscribers.
•Polling Number	Define the maximum port numbers for the pending SMS queue.	0 - 64
•SM_RP_PRI Flag	Specify the priority of the SM_RP_PRI message. •Enable = High •Disable = Low	•Enable •Disable
•TP Reply Path Flag	Specify the TP Reply Path parameter in the SMS-DELIVER data unit. •Enable = Reply path is available •Disable = Reply path is unavailable	•Enable •Disable
MSISDN Segment	The MSISDN range of subscribers that are allowed to use the short message service.	Max 16 items
•MSISDN Start	The start of the MSISDN range.	Valid E.164 number
•MSISDN End	The end of the MSISDN range.	Valid E.164 number
SMPP	Specifies the SMPP connections over UDP or TCP.	Max 32 items
•Link Alias	Alias of the SMPP link which corresponds to the link configured in EMS >Configuration >NSS >SMPP.	--
•Session Type	Specify how the local SMPP entity shall bind to the remote SMPP entity. •Tx: Work as Transmitter •Rx: Work as Receiver •TRx: Work as Transceiver	•Bind_Tx •Bind_Rx •Bind_TRx
•Service Number	Service Center Number, which will display on the terminating mobile.	Numeric max 16 digits
•DCS	Data Coding Scheme.	•7bit Default 7bit •7bit Default 8bit •8bit DCS0 Default 7bit •8bit DCS4 Default 7bit •8bit DCS0 Default 8bit •8bit DCS4 Default 8bit
•Platform ID	The served MSC platform.	•Platform 0 •Platform 1 •Ignore
•Time to Live	Define the maximum duration of a pending message which should be kept in sending array till reaches the called subscriber. Messages can't send out in the validity period will be deleted.	1 - 604800 seconds
•Manipulation Flag	Enable or disable CLI Manipulation in XAPP setting.	•Enable •Disable
•TON	Indicate Type of Number for destination. If not known set to Unknown.	•Unknown •International •National •Network Specific •Subscriber Number •Alphanumeric •Abbreviated
•NPI	Indicate Numbering Plan Indicator for destination. If not known set to Unknown.	•Unknown •ISDN •Data •Telex •Land Mobile •National •Private •ERMES •Internet •WAP Client ID

Short Message Service Center